Description

The Jaquet EV58AM series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet and an amplifier. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The signal is converted to a square wave signal with constant amplitude by the integrated amplifier. The frequency of the output signal is proportional to the speed of the moving target.

Features:

• Signal Output: Square wave signal from NPN output transistor with internal 2.2 kOhm pull-up resistor, DC-coupled to supply
• Thread Length: 1.3" 5/8-18 UNF-2A thread
• 5-32 DCV Supply Voltage
• 5 mA (without load) maximum current consumption
• 0-20 kHz Frequency Range
• Housing: 5/8"-18 UNF-2A, tightening torque: max. 35 Nm
• Connection: Connector mates with straight plug MS3106A-10SL-3S, 3-pins
• Coil Inductance: 170 mH +/-10% at 1 kHz
• Coil Resistance: 850 Ohm +/-10%
• Coil Magnet Polarity: North pole towards front face
• Operating Temperature: -104-257°F (-40-125°C)
• Protection: IP68 (Sensor) / IP67 (Cable)
• Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Additional Info

• VRS Sensors
• Connector